BattenPro® has been developed to provide the natural look and feel of real timber whilst eliminating the ongoing maintenance and costs associated with both timber and composite products. The Super Durable Oxyplast powder coating and advanced sublimation technology make BattenPro® a hard-wearing finish that never requires painting or staining. Just a simple and basic cleaning program is all you need to achieve the optimum performance of your BattenPro®.
This product care guide outlines BattenPro’s recommended cleaning guidelines and schedule to maintain your BattenPro®’s beautiful appearance and ensure its warranty. All methods of cleaning should be in accordance with the Australian Standard for powder coating AS 3715.
Made for Australian Conditions
BattenPro® is made and designed to withstand Australian conditions, including strong sunlight, moisture and salt spray. BattenPro® has passed extreme exposure testing and meets Australian and International Standards for properties such as:
Non-combustibility
Marine grade (suitable for coastal areas)
UV stability (resistant to fading)
Corrosion resistance
Resistance to wearing, chipping, scratching and peeling
Adhering to the cleaning guidelines as outlined in this document and AS 3715 will ensure the long-lasting performance of your BattenPro®, even in the harshest conditions.
Please note BattenPro® has been developed in accordance with the Australian Standard for powder coating AS 3715.
BattenPro Cleaning Guidelines
BattenPro’s Aluminum Products are very easy to clean. Simply follow these steps to keep your beautiful, timber-look finish in pristine condition.
Wash all surfaces using a hose or high-pressure attachment. It may help to test your hose on a small patch of the finish first, to help you determine the right pressure setting and distance from the washer head to the finish to achieve a thorough clean. (Please note: BattenPro does not recommend using a Cyclonic or Tornado washer head.)
Rinse thoroughly with clean water to remove all cleaning residue and dirt. In areas with heavy fine dust (such as during construction) you may need to rinse multiple times to prevent dust from drying on the surface. Using a towel or microfibre cloth to dry the Surface can also help prevent water spots and dust deposits.
To remove stubborn deposits, use a mop/soft cloth and warm, soapy water or a non-abrasive detergent such as Morning Fresh. Avoid using hard bristle brushes which could cause micro-scratching.
When cleaning and caring for your BattenPro®, it is important you follow a systematic cleaning program that meets the guidelines set out in the Australian Standard for architectural powder coating AS 3715, and record the cleaning undertaken as well as the location and characteristics of your product.
Approved Products for Cleaning
When cleaning , it is important you use products which are compatible with the powder coated surface. Two cleaning products are approved by Battenpro:
• Morning Fresh detergent: Morning Fresh has been tested and approved. Other dish washing detergents may be used, but these have not been tested.
• Orange Solve Citrus Cleaner: This is readily available from Bunnings or other industrial cleaning suppliers.
In all cases, after using one of the approved cleaning products, the surfaces MUST be thoroughly rinsed with clean, fresh water.